Duraform "hayalleriniz artık hayatınızın bir parçası"

              

          
Duraform                
vs              
Aluminum

Duraform
profiles have lots of advantages according to the equivalent of aluminum.
Duuraform provides electricity and heat insulation. It is resistant to
shocks and rotand radio waves and electromagnetic waves can pass on it.

Duraform
profiles will be compared with aluminum profiles in the followings.

Click here to
download the chart in PDF.

NOTE: 
The data of construction Duraform profiles were carried out a comparison
by taking average values. It should not be forgotton that values may
vary and it may be changelable according to Duraform profile project
requirements.


—————————————————————–

*
Corrosion
Resistance

– Duraform
Construction Profiles

Duraform profiles
is composed of fiber glass life with a special resin in projects.It is
extremely durable against UV effect , chemical substances 
oxidation corrosion and all kinds of natural thank to its special resin. 

– Aluminum Profiles

It has Galvanic
Corrosion
.

It can be increased
by up to a certain level container with special coatings
.

*
Specific
weight

– Duraform
Construction
Profiles

It is %75 lighter
than steel and it is %30 lighter than aluminum.It has easiness fitting
and transportation
.

– Aluminum Profiles

It is extremely
lightweight
. Although it is
%30 lighter than copper and stell, it is % 30 heavier than Duraform per
a meter.

*

Conductivity

– Duraform 
Construction Profiles

Duraform profiles do
not transmit electricity and head.

– Aluminum Profiles


It transmites electricity. Grounding is required
.

*
Thermal
Conductivity – Expansion

– Duraform
Construction Profiles

Isolation capability
is strong. Thermal conductivity is very low.

4 (BTU/SF/HR/Fo/IN);


Expansion coefficient is lower
.

4.4 (IN/IN/Fo)106.

– Aluminum Profiles

Insulation
capability is weak – Thermal conductivity is high.

150 (BTU/SF/HR/Fo/IN);


Expansion coefficient is higher.

11-13 (IN/IN/Fo)106.

*

Resistance

– Duraform
Construction Profiles

Ultimate flexural
strength (Fu)
LW = 30 ksi
CW = 10 ksi.

Durability- weight
ratio of Durafotm profiles are extremely high.The some weight Duraform
profiles more robust than steel profiles.

– Aluminum Profiles

Flexural strength
(Fu) 35 ksi.

It is Homogenous.

*
Appreance

– Duraform
Construction
Profiles

It may be produced
with colors and patterns
.
It does not require to repaint and maintenance.

– Aluminum Profiles


It is silver colored. Other colors are made with electrolysis and
painting methods. Mechanical, chemical and galvanizing coating can be
done.

*
Electromagnetic and permeability to
radio waves

– Duraform
Construction Profiles

It does not affect
in a bad way to antenna to receiver and transmitter because it transmit
the waves of electromagnetic and radio. It does not catch on radar
.

– Aluminum Profiles

It is extremely
insulators against electromagnetic waves and radio waves
.

*
Setup

– Duraform
Construction
Profiles


It can  combine easily and installation is easy. It can  cut
with simple workshop equipment, it can  combine and all kinds of
construction can built easily. It can  perform easily with a lot of  
ways instead of weld.

– Aluminum Profiles

It can 
process
easily
. With very different
methods, including the source can be process easily it ca add each other
and setup.

*
Shock
Resistant

– Duraform
Construction Profiles

It does not have
permanent deformation on impacts under the negative temperature because
silicon base life of Duraform profiles spread the whole impact all the
surface
.

– Aluminum Profiles

Is easily deformed
with shock effect.

*
Cost

– Duraform
Construction Profiles

Labor is cheap.
Aluminum is more competitive  by project basis.

– Aluminum Profiler

Labor is cheap.
It is a little bit expensive than Duraform on project.

Contact Us

Leave a Reply

Your email address will not be published. Required fields are marked *